![]() If this happens you can only get out of this mode by connecting the mSata drive directly to a computer via an mSata-Sata enclosure (USB3.0 enclosures are also reported to work). ![]() Crucial M500, Samsung EVO range) have a power-loss mode which will result in the iPod displaying the sad iPod/red cross display. Do not allow the battery to drain too much or become low on charge.Ĭertain mSata drives (e.g. Power draw is high for mSata / M.2 drives especially drives 480Gb and above in capacity. The mSata and M.2 drives will get hot during syncing, if your ambient temperatures are high then try and cool the iPod, if possible. SD slots have to be filled in order, so if you want to use 3 microSD cards in the iFlash-Quad, then they need to fill uSD1, uSD2, uSD3. We suggest the fastest card you have is used in slot SD1 or uSD1. You can find lists of user reported working cards on the relevant product pages. Tips for iFlash-Solo, iFlash-Dual & iFlash-QuadĪt a minimum we recommend UHS-I U1 or U3 class SD cards, these have the best speeds and required access times to work in iPods. Library Size – refer to our compatibility chart to determine iTunes library size limits – if you exceed your iPods library limits this will show up as random resets, resetting on large playlists or genius mixes, or iPod hanging on the lit Apple logo on booting. This is important as any movement can cause stress on the HDD ribbon.īefore Closing – check the iPod powers up and you have the restore screen, and that you can restore/sync before clipping it back together. Padding – make sure you use the supplied foam pads or thermal pad to secure the iFlash board and stop it moving around. Rubber Bumpers – remove all rubber bumpers and strips that are for the original HDD from the iPod, these are not required for use with iFlash adapters. The iPod motherboard side can sometimes be warped – you may be able to recover it by straightening it slightly, otherwise you will need a new ribbon. HDD Ribbon – If you are having any issues it will generally be due to a damaged or faulty HDD ribbon, to confirm remove ribbon and inspect for cracks or tears. ZIF Connector – lift the black bar on the ZIF connector on the iFlash board before trying to fit the HDD ribbon, the zif connector should always face out (this is the opposite to the original HDD). With care and the correct use of the tools, it is totally possible to open with no damage. Opening iPods – take your time to minimise damage to the case back, there are plenty of videos on the internet which show iPods being opened – we suggest watching some to understand how the iPod is held together. While we can recommend products the choice comes down to your personal preference and of course budget, but our list makes a good starting point for the decision process! General Tips Other users like the idea of mSata or M.2 drives, you may have some drives left over from previous upgrades or projects. you may prefer to get the iFlash-Quad rather than the iFlash-Solo. Of course if you are after flexibility and want to start with 128GB before slowly moving up to say 512GB or even 1TB. NOTE: Make sure your iPod model is listed as compatible with the iFlash board recommended especially the 3rd and 4th Gen iPods. Using the iFlash-Solo, iFlash-Dual or iFlash-Quad IFlash-Solo with 128GB to 256GB SDXC card IFlash-ATA1 with 128GB to 256GB SDXC card IFlash-Solo and 4th Gen Converter with an 128GB SDXC card Our recommended upgrade path by iPod model for newbie modders are : 3rd Gen ![]() However, we do understand especially for new users just starting in the world of iPod modding the choices can be overwhelming. Everyone is different and we think providing choice is important hence why we have an extensive range of products to fit with everyones needs / desires / budgets and the need to go extreme □ ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |